Why You Should Have More Than One SAAB Replacement Key
A spare key could save you lots of time and trouble. It's particularly important when your key fob suddenly stops working. The most common reason is a dead coin battery, but it can be a number of other things too.
The cost of putting in an additional key to a car at a dealer can be around PS1500 and it could take up to 10 days.
Transponder key
Transponder keys are car keys that contain an electronic chip inside the key fob. The chips transmit radio signals to communicate with the immobilizer of your vehicle. They are designed to deter theft by making it more difficult for thieves to open your vehicle. Transponder keys can also be used to locate vehicles stolen. This is because, when you insert the key into the immobilizer, it will transmit a signal via GPS to your vehicle.
The majority of new cars come with a transponder keys, which is a fantastic anti-theft option. Older models may not come with these features. You can still get a transponder from an auto dealer if your car doesn't have one. A new transponder is usually much less expensive than a standard "blade key".
You can buy a replacement key online, or at an auto dealer. The key needs to be programmed, which can be done by a locksmith or an authorized dealer. The process takes only one minute and costs less than what you would pay at an auto dealer. It's vital to keep an extra key in case you misplace your original or in the situation of an emergency. In the event of trying to start your car without a functioning key could harm the ignition system and prevent it from turning off again.
Keys that are wired
Saab owners must always have two keys for their vehicle. It is expensive to add another key and requires the services of a dealer who has a specific tool for older models, but it can be done for less than $200 if you choose the correct components. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges.
It is not uncommon for batteries of these remotes, to go out over time. It is essential to replace them frequently and it's not a big task to do so. You will need a small flathead and patience. With the screwdriver, place it in the slot in the middle of the case and gently open the case. Once the case has split open, you will be able to access the electronics inside.
The space-bar key as well as the shift key are both equipped with a copper cable under them that connects the pressure pad to the electronic. It is imperative to remove the wire from the key, because it could prevent the car from acknowledging the key. The wire also connects the ignition key to the key. Take it off prior to replacing the key.
Remote key
The SAAB 9-3 03-11 is among the most beautiful vehicles available. However it can be a little difficult to operate. The key fob could be a little fragile and the buttons can become stuck. Fortunately, there's a simple solution: replace the key case by yourself.
To do this you'll require a new key and an additional case to purchase at all auto parts stores. You'll also require a small flathead screwdriver to take out the electronics from the old case. When you are removing electronic components, you must be sure to do it with care. They could easily get damaged.
Use the small flathead to split open the case after you have removed the electronics. Be gentle and avoid damaging the plastic. Once saab key fob opened the case, you'll be able to gain access to the battery and will be able to remove it easily.
Most used Saabs come with only one key. To add a second key, you'll need an extra computer module (often known as the CIM) as well as a new key, as well as specialized programming to convince the car that you're not trying to take it away. Most locksmiths will not perform this as it's too expensive. You can do it yourself, if you are resourceful and lucky enough to locate the proper components at a reasonable cost.
Keyless entry
It's a smart idea to keep a spare Saab key, regardless of whether your car has an alarm or not. It's simple to duplicate a traditional metal car key but it's harder to steal a car with the more modern key-fob-based ignition. This is because the old-style keys made of steel don't have security features, whereas modern keys have security features.
First, take off the emergency key. Make sure you have a screwdriver on your side. After you've removed the emergency key, you can use a flathead screwdriver for splitting the case open. This will allow you to see the battery and replace it.
Reassemble the keyfob after installing the new battery. Make sure to align all the components and the limiters, which hold the battery in position. Once you're done, you can insert the key into the ignition and resynchronize it to the car. It's now time to go! This is a simple method to save money while also keeping your vehicle secure. Make sure that the replacement battery has the same label as the original one and is compatible. The key won't work properly if it's not the same type as the original.